News: This is what you need to know about brooding in chicks to win alot in poultry farming


Brooding is a very crucial stage in poultry farming. What happens before and after the chicks arrive will impact their health, livability, and performance, so it is in our interest to provide day-old chicks with an adequate environment.

There are things we need to put in place before the arrival of the broiler chicks, to make sure they settle in well and prevent problems at a later stage.

Here is what you should do before the chicks' arrival:

Make sure to clean and disinfect your pen or house thoroughly.

Spread litter evenly to a depth of 2-5 cm (0.8-2 inches).

Your feed form should be a dust-free sieved crumb, or 2 mm (0.06 inches) mini pellet.

Pre-heat the pen or house at least 24 hrs before chick arrival.

Arrange the equipment to allow unrestricted access to feed and water.

When the chicks arrive, you should weigh a sample and record their live weight and CV% / Uniformity.

Check the chick vent temperature is between 39.4-40.5 degrees centigrade, and place the chicks evenly onto paper. Ensure feed and water is available and that light intensity is between 30-40 lux.


When the birds have settled into their new environment, check their behavior for 1-2 hours, and adjust the conditions according to chick behavior.

When the chicks are tightly-packed together, it means that they are too cold. They become distressed and noisy.

If they avoid the heat source, it means they are too hot; they become quiet, spread their wings, and pant.

The chicks should neither be too hot nor too cold and evenly-spread across the house/pen.

You should provide ventilation without drafts, to provide fresh air, remove waste gas, excess moisture, and heat.

Supply small and frequent top-up of feed, check water supply is running and that supplementary drinkers contain freshwater.

Check crop fill. In 2 hours, 75% of the birds should have full crop fill, 80% in 4 hours, more than 80% in 8 hours, more than 85% in 12 hours, and more than 95% at 24 hrs.

For best results during brooding, a farmer should buy quality chicks, that are clean after hatch, stand firmly and walk well, alert and active, free of deformities, and vocalize contently.


If the paper placed on the floor in the house does not disintegrate naturally, then it should be removed from the pen house from day three (3) onward.

Brooding rings, if used, should be expanded from day three (3) of age, and completely removed at 5-7 days of age.

Endeavor to top up the feed on the paper/feed tray at regular intervals during the first 3 to 4 days.

Birds should be on the main-feeding system by six (6) to seven (7) days of age.

Provide 23 hours of light for the first seven (7) days to encourage feed and water intake.


A good quality starter feed will support early growth and physiological development.


Monitor the feed to water ratio daily.

The ideal water temperature should be 18 degrees centigrade - 21 degrees centigrade.

Broilers should not have to travel more than 2 m (6.6 ft) to get water.

The Water level should be 0.6 cm BELOW the top of the drinker until ten (10) days of age. After ten (10) days, there should be 0.6 cm of water in the base of the drinker.

Drinkers should be kept well-maintained and clean at all times.

In hot weather, water consumption of broilers will increase and the drinker lines should be flushed at regular intervals to keep water cool.


During brooding, broilers are susceptible to diseases because their immunity is not strong at a young age, so there are measures that must be taken in other to prevent infection of the birds.

Prevent unauthorized access to the farm.

Shower on to the farm and change clothing.

Maintain a record of visitors.

Wash and sanitize hands and boots when entering and leaving houses.

Clean and disinfect all equipment before bringing in to the house.

Visits the youngest flock first.

Whenever possible use ''all-in/all-out'' placement cycle.

Downtime between flocks will reduce contamination on the farm.

Clean up feed spills as soon as they occur

Maintain an effective rodent/vermin control program.


High early mortality - Causes include:

Poor chick quality: Check the hatchery practice and egg hygiene.

Incorrect brooding: In this case, re-adjust the brooders.

Disease: When faced with this problem, perform post mortem on the dead chicks to know the cause of the disease. Take your veterinary advice.

Appetite: measure and achieve target crop fill levels, check feed availability, amount, and space.


Opera News Olist